Due to its exceptional physical properties, synthetic diamond is an ideal material for the realization of UV and X-ray detectors to be used for the characterization of laser-generated plasmas. Diamond detectors are able to operate at high temperatures and in the presence of high fluxes of ionizing radiation, where traditional silicon-based detectors usually fail. In this paper, we report on Raman and electro-optical characterization of a structure consisting of intrinsic diamond/boron-doped diamond homoepitaxially grown by chemical vapor deposition onto a commercial high pressure high temperature Ib-type diamond substrate using a 1% CH4/H2 gas mixture. A metal–insulator–semiconductor (MIS) diode was obtained by thermally evaporating an aluminum contact on the growth surface of the intrinsic layer. The detection capability of this device operating in transverse configuration was measured in the deep UV spectral range. The device sensitivity has been estimated at different biasing voltages and at two wavelengths having different penetration depths into the material. The device was also tested at zero biasing voltage (photovoltaic mode operation), showing quite a good photoresponse. These results suggest that MIS structures based on high-quality homoepitaxial diamonds may be successfully utilized for photo-detection even at zero bias.

Single-crystal diamond MIS diode for deep UV detection / Alfieri, D.; Almaviva, S.; DE SIO, Antonio; Donato, M. G.; Faggio, G.; Giannini, A.; Messina, G.; Morgante, S.; Pace, Emanuele; Santangelo, S.; Scuderi, S.; Tripodi, P.. - In: RADIATION EFFECTS AND DEFECTS IN SOLIDS. - ISSN 1042-0150. - STAMPA. - 165:(2010), pp. 737-745. [10.1080/10420151003729870]

Single-crystal diamond MIS diode for deep UV detection

DE SIO, ANTONIO;PACE, EMANUELE;
2010

Abstract

Due to its exceptional physical properties, synthetic diamond is an ideal material for the realization of UV and X-ray detectors to be used for the characterization of laser-generated plasmas. Diamond detectors are able to operate at high temperatures and in the presence of high fluxes of ionizing radiation, where traditional silicon-based detectors usually fail. In this paper, we report on Raman and electro-optical characterization of a structure consisting of intrinsic diamond/boron-doped diamond homoepitaxially grown by chemical vapor deposition onto a commercial high pressure high temperature Ib-type diamond substrate using a 1% CH4/H2 gas mixture. A metal–insulator–semiconductor (MIS) diode was obtained by thermally evaporating an aluminum contact on the growth surface of the intrinsic layer. The detection capability of this device operating in transverse configuration was measured in the deep UV spectral range. The device sensitivity has been estimated at different biasing voltages and at two wavelengths having different penetration depths into the material. The device was also tested at zero biasing voltage (photovoltaic mode operation), showing quite a good photoresponse. These results suggest that MIS structures based on high-quality homoepitaxial diamonds may be successfully utilized for photo-detection even at zero bias.
2010
165
737
745
Alfieri, D.; Almaviva, S.; DE SIO, Antonio; Donato, M. G.; Faggio, G.; Giannini, A.; Messina, G.; Morgante, S.; Pace, Emanuele; Santangelo, S.; Scuderi, S.; Tripodi, P.
File in questo prodotto:
File Dimensione Formato  
2010 REDS SCD MIS diode.pdf

Accesso chiuso

Tipologia: Versione finale referata (Postprint, Accepted manuscript)
Licenza: Tutti i diritti riservati
Dimensione 324.82 kB
Formato Adobe PDF
324.82 kB Adobe PDF   Richiedi una copia

I documenti in FLORE sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificatore per citare o creare un link a questa risorsa: https://hdl.handle.net/2158/776829
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 6
  • ???jsp.display-item.citation.isi??? 5
social impact