Existing timber structures are often affected by peripheral degradation due to insect attack. The contribution of the degraded areas of the beam cross-section to the load bearing capacity is usually neglected, leading to an over-conservative approach to the structural verification of historic wooden constructions. This work analyses timber elements dismantled from a nineteenth century building by means of a comprehensive geometrical survey, the evaluation of the degraded portion of the cross-section and by destructive bending tests. An iterative procedure based on the linear elastic theory of composite beams was set up to define a reduction coefficient of the mechanical properties of degraded wood, in order to include the contribution of the degraded parts during the structural calculation. The analytical procedure proved to be effective only for timber elements without localised major defects or anomalies, such as woodworking or internal decay, which may alter the linear elastic flexural behaviour of the beam. The values obtained of the reduction coefficient ranged from 1.7 to 5.0 and were successfully verified by numerical models.
Evaluation of the mechanical contribution of wood degraded by insects in old timber beams through analytical calculations and experimental tests / Degl'Innocenti M.; Nocetti M.; Cerisano Kovacevic V.; Aminti G.; Betti M.; Pio Lauriola M.; Brunetti M.. - In: CONSTRUCTION AND BUILDING MATERIALS. - ISSN 0950-0618. - ELETTRONICO. - 339:(2022), pp. 1-9. [10.1016/j.conbuildmat.2022.127653]
Evaluation of the mechanical contribution of wood degraded by insects in old timber beams through analytical calculations and experimental tests
Cerisano Kovacevic V.;Betti M.;
2022
Abstract
Existing timber structures are often affected by peripheral degradation due to insect attack. The contribution of the degraded areas of the beam cross-section to the load bearing capacity is usually neglected, leading to an over-conservative approach to the structural verification of historic wooden constructions. This work analyses timber elements dismantled from a nineteenth century building by means of a comprehensive geometrical survey, the evaluation of the degraded portion of the cross-section and by destructive bending tests. An iterative procedure based on the linear elastic theory of composite beams was set up to define a reduction coefficient of the mechanical properties of degraded wood, in order to include the contribution of the degraded parts during the structural calculation. The analytical procedure proved to be effective only for timber elements without localised major defects or anomalies, such as woodworking or internal decay, which may alter the linear elastic flexural behaviour of the beam. The values obtained of the reduction coefficient ranged from 1.7 to 5.0 and were successfully verified by numerical models.I documenti in FLORE sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.