Additive manufacturing (AM) is a broad definition of various techniques to produce layer-by-layer objects made of different materials. In this paper, a comprehensive review of laser-based technologies for polymers, including powder bed fusion processes (e.g. selective laser sintering, SLS) and vat photopolymerisation (e.g. stereolithography, SLA), is presented, where both the techniques employ a laser source either to melt or cure a raw polymeric material. The aim of the review is twofold: (i) to present the principal theoretical models adopted in the literature to simulate the complex physical phenomena involved in the transformation of the raw material into AM objects; (ii) to discuss the influence of process parameters on the physical final properties of the printed objects, and in turn on their mechanical performance. The models being presented simulate: the thermal problem along with the thermally activated bonding through sintering of the polymeric powder in SLS; the binding induced by the curing mechanisms of light-induced polymerisation of the liquid material in SLA. Key physical variables in AM objects, like porosity and degree of cure in SLS and SLA respectively, are discussed in relation to the manufacturing process parameters, as well as to the mechanical resistance and deformability of the objects themselves.

LASER-BASED ADDITIVELY MANUFACTURED POLYMERS: A REVIEW ON PROCESSES AND MECHANICAL MODELS / Roberto Brighenti; Mattia Cosma; Liviu Marsavina; Andrea Spagnoli; Michele Terzano. - In: JOURNAL OF MATERIALS SCIENCE. - ISSN 1573-4803. - 56:(2020), pp. 961-998. [10.1007/s10853-020-05254-6]

LASER-BASED ADDITIVELY MANUFACTURED POLYMERS: A REVIEW ON PROCESSES AND MECHANICAL MODELS

Roberto Brighenti;
2020

Abstract

Additive manufacturing (AM) is a broad definition of various techniques to produce layer-by-layer objects made of different materials. In this paper, a comprehensive review of laser-based technologies for polymers, including powder bed fusion processes (e.g. selective laser sintering, SLS) and vat photopolymerisation (e.g. stereolithography, SLA), is presented, where both the techniques employ a laser source either to melt or cure a raw polymeric material. The aim of the review is twofold: (i) to present the principal theoretical models adopted in the literature to simulate the complex physical phenomena involved in the transformation of the raw material into AM objects; (ii) to discuss the influence of process parameters on the physical final properties of the printed objects, and in turn on their mechanical performance. The models being presented simulate: the thermal problem along with the thermally activated bonding through sintering of the polymeric powder in SLS; the binding induced by the curing mechanisms of light-induced polymerisation of the liquid material in SLA. Key physical variables in AM objects, like porosity and degree of cure in SLS and SLA respectively, are discussed in relation to the manufacturing process parameters, as well as to the mechanical resistance and deformability of the objects themselves.
2020
56
961
998
Roberto Brighenti; Mattia Cosma; Liviu Marsavina; Andrea Spagnoli; Michele Terzano
File in questo prodotto:
File Dimensione Formato  
115J_217_JMSc_AM.pdf

Accesso chiuso

Licenza: Tutti i diritti riservati
Dimensione 2.43 MB
Formato Adobe PDF
2.43 MB Adobe PDF   Richiedi una copia

I documenti in FLORE sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificatore per citare o creare un link a questa risorsa: https://hdl.handle.net/2158/1328113
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 75
  • ???jsp.display-item.citation.isi??? 59
social impact