This paper aims at demonstrating the feasibility of a LoRaWAN-based sensor node for temperature monitoring, autonomously powered by a polycrystalline silicon photovoltaic module with possible applications within the Internet of Things (IoT) domain in the horticulture field. The commercial solar cell was characterized under two light sources: a conventional white 4000 K Light Emitting Diode (LED) and a red and far red (R:FR) lamp peaked at 655 nm and 730 nm. The sensor node is equipped with a RFM95x LoRa transceiver which proved to be a valid technology in those application scenarios where robustness and low power consumption are required. The energy harvesting features are performed by a nano-power boost charger buck converter which deals with the power extraction from the photovoltaic module, the LiPo battery charging/discharging management and the supply of the sensor node. Field tests demonstrate that under R:FR light source, the energy self-sufficiency of the system is achieved: a positive balance between the battery charge and discharge is measured, sufficient both for the node working operation and for the battery charging.
Polycrystalline silicon photovoltaic harvesting for indoor IoT systems under red-far red artificial light / Bruzzi, M; Cappelli, I; Fort, A; Pozzebon, A; Tani, M; Vignoli, V. - ELETTRONICO. - (2021), pp. 1-6. [10.1109/SAS51076.2021.9530063]
Polycrystalline silicon photovoltaic harvesting for indoor IoT systems under red-far red artificial light
Bruzzi, M
;
2021
Abstract
This paper aims at demonstrating the feasibility of a LoRaWAN-based sensor node for temperature monitoring, autonomously powered by a polycrystalline silicon photovoltaic module with possible applications within the Internet of Things (IoT) domain in the horticulture field. The commercial solar cell was characterized under two light sources: a conventional white 4000 K Light Emitting Diode (LED) and a red and far red (R:FR) lamp peaked at 655 nm and 730 nm. The sensor node is equipped with a RFM95x LoRa transceiver which proved to be a valid technology in those application scenarios where robustness and low power consumption are required. The energy harvesting features are performed by a nano-power boost charger buck converter which deals with the power extraction from the photovoltaic module, the LiPo battery charging/discharging management and the supply of the sensor node. Field tests demonstrate that under R:FR light source, the energy self-sufficiency of the system is achieved: a positive balance between the battery charge and discharge is measured, sufficient both for the node working operation and for the battery charging.I documenti in FLORE sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.