The efficiency of a hybrid patented consolidant (PAASi) and two commercially available hybrid coatings (a consolidant named AISiX and a hydrophobic product named WS3) properly modified was assessed on a calcarenite substrate. Test routines based on standard recommendations were first applied to evaluate the performances of the consolidant and protective treatments, while the investigation of additional aspects such as penetration depth and interaction with the substrate was achieved by a multi-scale approach based on classic intrusion methods (mercury intrusion porosimetry) and Drilling Resistance Measurement System (DRMS), combined with non-invasive imaging techniques (X-ray computed micro-tomography and neutron radiography) and small angle neutron scattering (SANS). A distinct interaction of the products with the pore network of the stone was quantified in the range 0.007-200 mu m. Their effects on capillary water absorption were also visualized with neutron imaging. The suitability of the products on the selected substrate was discussed, highlighting also how the applied routine can support conservation material studies. The results indicated that the Al-Si-based product led to unwanted effects. Alternative application methods and/or curing procedures have to be explored to overtake these undesirable changes. On the contrary, the polyamidoamine-based product seemed to be more suitable for calcarenite substrates conservation. The performances of the hydrophobic coating, when used in combination with consolidants, were strictly influenced by the pre-consolidation of the substrate. (C) 2018 Elsevier Ltd. All rights reserved.
Efficiency assessment of hybrid coatings for natural building stones: Advanced and multi-scale laboratory investigation / Raneri, S.; Barone, G.; Mazzoleni, P.; Alfieri, I.; Bergamonti, L.; De Kock, T.; Cnudde, V.; Lottici, P.P.; Lorenzi, A.; Predieri, G.; Rabot, E.; Teixeira, J.. - In: CONSTRUCTION AND BUILDING MATERIALS. - ISSN 0950-0618. - ELETTRONICO. - 180:(2018), pp. 412-424. [10.1016/j.conbuildmat.2018.05.289]
Efficiency assessment of hybrid coatings for natural building stones: Advanced and multi-scale laboratory investigation
Raneri, S.;
2018
Abstract
The efficiency of a hybrid patented consolidant (PAASi) and two commercially available hybrid coatings (a consolidant named AISiX and a hydrophobic product named WS3) properly modified was assessed on a calcarenite substrate. Test routines based on standard recommendations were first applied to evaluate the performances of the consolidant and protective treatments, while the investigation of additional aspects such as penetration depth and interaction with the substrate was achieved by a multi-scale approach based on classic intrusion methods (mercury intrusion porosimetry) and Drilling Resistance Measurement System (DRMS), combined with non-invasive imaging techniques (X-ray computed micro-tomography and neutron radiography) and small angle neutron scattering (SANS). A distinct interaction of the products with the pore network of the stone was quantified in the range 0.007-200 mu m. Their effects on capillary water absorption were also visualized with neutron imaging. The suitability of the products on the selected substrate was discussed, highlighting also how the applied routine can support conservation material studies. The results indicated that the Al-Si-based product led to unwanted effects. Alternative application methods and/or curing procedures have to be explored to overtake these undesirable changes. On the contrary, the polyamidoamine-based product seemed to be more suitable for calcarenite substrates conservation. The performances of the hydrophobic coating, when used in combination with consolidants, were strictly influenced by the pre-consolidation of the substrate. (C) 2018 Elsevier Ltd. All rights reserved.I documenti in FLORE sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.