The goal of the present manuscript is the investigation of two novel systems for partial CO2 capture from the exhausts of fossil fuelled powerplants. These systems should be relatively cheap and easily applicable to existing powerplants with minor modification, in order to make them accessible by a large range of users and favour a significant diffusion of partial CO2 sequestration. Two basic processes were proposed: 1. Absorption with a liquid solution of water and NH3; 2. Absorber/desorber system with a liquid solution of water and phosphates. In the first one, the exhausts react into an absorber column with a liquid sorbent, which is a solution of water and ammonia. The process sequestrates the CO2 in carbammate and bicarbonate and the final product are salt of ammonia, i.e. ammonium carboamate (NH4HCO3) and ammonium bicarbonate (NH4NH2COO). The outgoing streams of this process are the exhaust gas with a reduced content of CO2 and a secondary product formed by salts of ammonium, which have an interesting market potential as fertilizers. The obtained CO2 reduction level was more than 40%, while the amount of secondary products is high enough to get it marketable. In the second process, the exhausts passing through an absorber column react wi th a liquid sorbent, which is a solution of water and sodium (or potassium) phosphate. The process sequestrates the CO2 in bicarbonate ions by means of the ions phosphate and the outlet stream is a solution of water and phosphate and carbonate ions. This stream is collected in a desorbing column, where the phosphate ions are almost completely regenerated. The CO2 reduction level is always higher than 20% and it can also reach very high values, depending on the parameters of process.

Some innovative readily applicable proposals for chemical separation and sequestration of CO2 emissions from powerplants / D. FIASCHI; G. MANFRIDA; M. MASSINI; G. PELLEGRINI. - STAMPA. - (2004), pp. 1-7. (Intervento presentato al convegno 7th Biennial ASME ESDA Conference tenutosi a Manchester, UK nel July 19-22, 2004).

Some innovative readily applicable proposals for chemical separation and sequestration of CO2 emissions from powerplants

FIASCHI, DANIELE;MANFRIDA, GIAMPAOLO;
2004

Abstract

The goal of the present manuscript is the investigation of two novel systems for partial CO2 capture from the exhausts of fossil fuelled powerplants. These systems should be relatively cheap and easily applicable to existing powerplants with minor modification, in order to make them accessible by a large range of users and favour a significant diffusion of partial CO2 sequestration. Two basic processes were proposed: 1. Absorption with a liquid solution of water and NH3; 2. Absorber/desorber system with a liquid solution of water and phosphates. In the first one, the exhausts react into an absorber column with a liquid sorbent, which is a solution of water and ammonia. The process sequestrates the CO2 in carbammate and bicarbonate and the final product are salt of ammonia, i.e. ammonium carboamate (NH4HCO3) and ammonium bicarbonate (NH4NH2COO). The outgoing streams of this process are the exhaust gas with a reduced content of CO2 and a secondary product formed by salts of ammonium, which have an interesting market potential as fertilizers. The obtained CO2 reduction level was more than 40%, while the amount of secondary products is high enough to get it marketable. In the second process, the exhausts passing through an absorber column react wi th a liquid sorbent, which is a solution of water and sodium (or potassium) phosphate. The process sequestrates the CO2 in bicarbonate ions by means of the ions phosphate and the outlet stream is a solution of water and phosphate and carbonate ions. This stream is collected in a desorbing column, where the phosphate ions are almost completely regenerated. The CO2 reduction level is always higher than 20% and it can also reach very high values, depending on the parameters of process.
2004
Proceedings of 7th Biennial ASME Conference Engineering Systems Design and Analysis
7th Biennial ASME ESDA Conference
Manchester, UK
July 19-22, 2004
D. FIASCHI; G. MANFRIDA; M. MASSINI; G. PELLEGRINI
File in questo prodotto:
File Dimensione Formato  
ESDA2004-58508.PDF

accesso aperto

Tipologia: Versione finale referata (Postprint, Accepted manuscript)
Licenza: Open Access
Dimensione 124.21 kB
Formato Adobe PDF
124.21 kB Adobe PDF

I documenti in FLORE sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificatore per citare o creare un link a questa risorsa: https://hdl.handle.net/2158/238772
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus ND
  • ???jsp.display-item.citation.isi??? ND
social impact