The corrosion resistance of plasma nitrided Ti–6Al–4V titanium alloy in nitric acid solutions was investigated using polarisation curves, cyclic voltammetry, XRD analysis and surface microhardness. For comparison, untreated alloy samples were tested under the same conditions. While the untreated alloy shows a passive behaviour, the compound layer obtained by glow-discharge nitriding treatment, which is composed of an outer TiN and an inner Ti2N layer, shows a high electrochemical inertia; however, if the polarisation potential is higher than a threshold or the period of immersion in high oxidising acid solution is sufficiently long, then the compound surface layer will be attacked and removed with corrosion rate higher than in the case of the untreated Ti–6Al–4V alloy. The corrosion resistance of Ti2N layer results higher in comparison with that of TiN layer.

Corrosion resistance properties of plasma nitrided Ti-6Al-4V alloy in nitric acid solutions / A. Fossati; F. Borgioli; E. Galvanetto; T. Bacci. - In: CORROSION SCIENCE. - ISSN 0010-938X. - STAMPA. - 46:(2004), pp. 917-927. [10.1016/S0010-938X(03)00188-4]

Corrosion resistance properties of plasma nitrided Ti-6Al-4V alloy in nitric acid solutions

BORGIOLI, FRANCESCA;GALVANETTO, EMANUELE;BACCI, TIBERIO
2004

Abstract

The corrosion resistance of plasma nitrided Ti–6Al–4V titanium alloy in nitric acid solutions was investigated using polarisation curves, cyclic voltammetry, XRD analysis and surface microhardness. For comparison, untreated alloy samples were tested under the same conditions. While the untreated alloy shows a passive behaviour, the compound layer obtained by glow-discharge nitriding treatment, which is composed of an outer TiN and an inner Ti2N layer, shows a high electrochemical inertia; however, if the polarisation potential is higher than a threshold or the period of immersion in high oxidising acid solution is sufficiently long, then the compound surface layer will be attacked and removed with corrosion rate higher than in the case of the untreated Ti–6Al–4V alloy. The corrosion resistance of Ti2N layer results higher in comparison with that of TiN layer.
2004
46
917
927
A. Fossati; F. Borgioli; E. Galvanetto; T. Bacci
File in questo prodotto:
File Dimensione Formato  
Corrosion resistance properties of plasma nitrided Ti6Al4V alloy in nitric.pdf

Accesso chiuso

Tipologia: Versione finale referata (Postprint, Accepted manuscript)
Licenza: Tutti i diritti riservati
Dimensione 421.62 kB
Formato Adobe PDF
421.62 kB Adobe PDF   Richiedi una copia
Corrosion resistance properties of plasma nitrided Ti6Al4V alloy in nitric _ abstract.pdf

Accesso chiuso

Tipologia: Altro
Licenza: Tutti i diritti riservati
Dimensione 291.03 kB
Formato Adobe PDF
291.03 kB Adobe PDF   Richiedi una copia

I documenti in FLORE sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificatore per citare o creare un link a questa risorsa: https://hdl.handle.net/2158/316438
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 60
  • ???jsp.display-item.citation.isi??? 59
social impact