An analysis and experimental verification of a hybridge current-driven zero-current-switching rectifier are given. In the hybridge rectifier, the diodes turn on at zero di/dt, low dv/dt, and turn off at low di/dt. Therefore, the hybridge rectifier is suitable for high-frequency high-efficiency applications. The current source driving the rectifier can be constituted by a class D or a class E inverter. Since these inverters operate with nearly zero switching losses, high power-density DC-DC converters can be assembled by using resonant inverters and hybridge rectifiers. A DC-DC converter based on a class D series resonant inverter and a hybridge rectifier was designed and tested for a constant output voltage YO=12 V and an output current IO from no-load to 12 A. The converter was operated at a DC input voltage ranging from 200 to 380 V and a minimum frequency of f=600 kHz. The theoretical results and measured performances were in good agreement. A maximum converter efficiency as high as 90% has been achieved for the DC-DC converter operated at full load
Hybridge zero-current-switching rectifier for high-frequency DC-DC converter applicationsProceedings of INTELEC 95. 17th International Telecommunications Energy Conference / M. Bartoli;A. Reatti;M.K. Kazimierczuk. - ELETTRONICO. - (1995), pp. 510-517. (Intervento presentato al convegno Telecommunications Energy Conference, 1995. INTELEC '95., 17th International) [10.1109/INTLEC.1995.499004].
Hybridge zero-current-switching rectifier for high-frequency DC-DC converter applicationsProceedings of INTELEC 95. 17th International Telecommunications Energy Conference
REATTI, ALBERTO;
1995
Abstract
An analysis and experimental verification of a hybridge current-driven zero-current-switching rectifier are given. In the hybridge rectifier, the diodes turn on at zero di/dt, low dv/dt, and turn off at low di/dt. Therefore, the hybridge rectifier is suitable for high-frequency high-efficiency applications. The current source driving the rectifier can be constituted by a class D or a class E inverter. Since these inverters operate with nearly zero switching losses, high power-density DC-DC converters can be assembled by using resonant inverters and hybridge rectifiers. A DC-DC converter based on a class D series resonant inverter and a hybridge rectifier was designed and tested for a constant output voltage YO=12 V and an output current IO from no-load to 12 A. The converter was operated at a DC input voltage ranging from 200 to 380 V and a minimum frequency of f=600 kHz. The theoretical results and measured performances were in good agreement. A maximum converter efficiency as high as 90% has been achieved for the DC-DC converter operated at full loadFile | Dimensione | Formato | |
---|---|---|---|
00499004.pdf
accesso aperto
Tipologia:
Versione finale referata (Postprint, Accepted manuscript)
Licenza:
Open Access
Dimensione
641.37 kB
Formato
Adobe PDF
|
641.37 kB | Adobe PDF |
I documenti in FLORE sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.