The LEONARDO project, funded under the Horizon 2020 framework, is aimed at developing a new concept of micromobility electric vehicle combining the benets of an e-kick scooter (rapid learning curve, stability) and those of a monowheel (greater agility). The goal is the development of a vehicle able to increase the consensus towards electric micromobility for enabling a relevant spread of this green transport solution, thanks to specic expedients like: (a) the possibility of exploiting an auxiliary battery pack to increase the path traveled by the vehicle; (b) a mass reduced to 10 kg, allowing to easily lift and move the vehicle to routinely encountered upper-level spaces (steps, the trunk of a vehicle, etc.). The weight reduction compared to similar vehicles necessarily involves the replacement or elimination of bulky components like suspension elements; for this reason, the deck must have intrinsic shock absorbing characteristics to maximize the rider comfort. The objective of the present work is the identication of a class of decks for e-kick scooters that best meets the user comfort needs in an urban environment. To this end, experiments have been performed replacing the aluminium deck of a commercially available electric scooter with decks of different materials; the comfort offered by each deck has been measured compatibly with the ISO 2631:1997 standard on a closed test circuit, in correspondence of six different obstacles that the rider may tackle in a typical urban scenario. The results of the study, read in a statistical key by regressive methods and analysis of variance, evidence highest compatibility with maximum comfort criteria for the 11.5 mm thick bamboo deck; namely, the test campaign evidences how the maximum comfort for the rider can be obtained with a deck having a stiffness similar to that of bamboo. In this context, the bamboo deck lacking of shock absorbers demonstrates superior performance compared to aluminium decks equipped with suspensions for the same application, with a mass saving of approximately 65%. Special care should however be paid to the forces the deck could sustain: moving from an aluminium to a bamboo deck which is 20 times less stiff, forces decrease of only 20%. Overall, these highlights represent a comprehensive set of elements to pilot the design of micromobility vehicles, from both standpoints of comfort and resistance.

Comfort assessment for electric kick scooter decks / Michelangelo-Santo Gulino, Giulio Vichi, Giovanni Zonfrillo, Dario Vangi. - In: IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING. - ISSN 1757-8981. - ELETTRONICO. - (2022), pp. 1-12. (Intervento presentato al convegno 50th AIAS Conference).

Comfort assessment for electric kick scooter decks

Michelangelo-Santo Gulino;Giovanni Zonfrillo
;
Dario Vangi
2022

Abstract

The LEONARDO project, funded under the Horizon 2020 framework, is aimed at developing a new concept of micromobility electric vehicle combining the benets of an e-kick scooter (rapid learning curve, stability) and those of a monowheel (greater agility). The goal is the development of a vehicle able to increase the consensus towards electric micromobility for enabling a relevant spread of this green transport solution, thanks to specic expedients like: (a) the possibility of exploiting an auxiliary battery pack to increase the path traveled by the vehicle; (b) a mass reduced to 10 kg, allowing to easily lift and move the vehicle to routinely encountered upper-level spaces (steps, the trunk of a vehicle, etc.). The weight reduction compared to similar vehicles necessarily involves the replacement or elimination of bulky components like suspension elements; for this reason, the deck must have intrinsic shock absorbing characteristics to maximize the rider comfort. The objective of the present work is the identication of a class of decks for e-kick scooters that best meets the user comfort needs in an urban environment. To this end, experiments have been performed replacing the aluminium deck of a commercially available electric scooter with decks of different materials; the comfort offered by each deck has been measured compatibly with the ISO 2631:1997 standard on a closed test circuit, in correspondence of six different obstacles that the rider may tackle in a typical urban scenario. The results of the study, read in a statistical key by regressive methods and analysis of variance, evidence highest compatibility with maximum comfort criteria for the 11.5 mm thick bamboo deck; namely, the test campaign evidences how the maximum comfort for the rider can be obtained with a deck having a stiffness similar to that of bamboo. In this context, the bamboo deck lacking of shock absorbers demonstrates superior performance compared to aluminium decks equipped with suspensions for the same application, with a mass saving of approximately 65%. Special care should however be paid to the forces the deck could sustain: moving from an aluminium to a bamboo deck which is 20 times less stiff, forces decrease of only 20%. Overall, these highlights represent a comprehensive set of elements to pilot the design of micromobility vehicles, from both standpoints of comfort and resistance.
2022
Associazione Italiana Analisi Sollecitazioni (AIAS)
50th AIAS Conference
Goal 9: Industry, Innovation, and Infrastructure
Goal 11: Sustainable cities and communities
Michelangelo-Santo Gulino, Giulio Vichi, Giovanni Zonfrillo, Dario Vangi
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in FLORE sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificatore per citare o creare un link a questa risorsa: https://hdl.handle.net/2158/1243846
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus ND
  • ???jsp.display-item.citation.isi??? ND
social impact